I needed something to prop my feet up for sitting at my desk 8 hours a day Monday through Friday. However, the padding on it slips around because it comes loose. So I have to constantly tighten it unfortunately. But I do love it and I love that I can adjust it to my settings cuz I have short legs so I have to have it higher. But it is comfortable and it does help. My tailbone feel better from sitting in a chair all day.

Kind of hard to keep in position, but nice that it’s adjustable

Had for over a month now, really like it. Easy to change the angle of it, and locks in place just fine. I probably press too hard on it at times, but it still holds up just fine. Pillow top is conformable, and hasn't "flattened" yet, and I use it 10+ hours a day.

Only weird quirk, the bottom metal base has slightly bent, probably from the force of me pushing. But doesn't affect its usability.

Update at 5 months:

Still love it, I don't even "think" about it anymore, it's just a part of my desk setup. Wouldn't feel right without it now. Base hasn't bent any more, just a bit as I mentioned in my first review above.

Update at 1.5 years:

Works exactly as it did brand new, my feet still rest on it nearly all day, pressing quite hard at times. Simple upgrade I did was to add a little velcro strip between the pillow top and the base just so the pillowtop stays in one place better. Otherwise, still love it and works perfectly.

Update at 2.5 years:

This beast is still an amazing champ of a footrest. Mechanically this this is perfect, even with the heavy leadfoot weight I have pushed onto this thing. The metal plate I mentioned before that kinda warped, well that hasn't gotten any worse, and it's not any hinderance to me either way. Still works amazing.

HOWEVER! Finally the leather-type material covering the cushion has over the last 6 months started to break apart. It now looks like an old 1980's fake leather couch that is splitting all over. But, even still, it is comfortable and I would 100% still recommend this. Amplifies your computer veg-time greatly!

I would love to give this foot rest a 5star review but for my purposes, I cannot.

I was prepared to love it, to be able to depend on its versatility for comfort while resting my legs beneath my drawing table, but as I have wooden floors, it was nearly impossible to keep it sturdy in one place...it slides around on the floor beneath.

I even wrote to the company, believe it or not...asking if there was some way they could recommend setting it so it would not slide so much...and they wrote back suggesting I place a towel beneath to "increase the friction...have a good time!"

Excuse me??! "Have a good time?!?" What kind of an answer is that??

I finally decided, rather than return it (I do need some kind of rest beneath the table there) I will probably lay down a rubber mat...maybe that will help?!

THREE STARS***

UPDATE: Still, even after all this time, it slides around, even on a RUBBER MAT! for heaven's sake...sometimes it "loses" the way I have it set so the height changes on its own, as does the angle of the rest itself.

If it wasn't so pricey, I would probably throw it out and look around for a more convenient option, but as it is,....I'll probably keep it until I just get tired and sick to death of re-adjusting it. THREE STARS***

I came back and found this page two years after I bought it, to say that I would give this zero stars if I could. It CONSTANTLY slips out of place and the way it's supposed to just slide into place is SO faulty. I am constantly either trying to fight with this thing to fix it, or (my usual method) just stacking pillows on top of it to make it somewhat almost work. The tiny flat pillow included with the product will 100% always slide off or under the product, and it is HELL to try to fix. I have tried to use this thing forwards, backwards, sideways, literally any angle possible to make it try to work and it just doesn't. One awful thing too is that pet hair gets stuck in the grooves super easily, and it gets so gross. I hate this thing so bad and I'm going to throw a party when I upgrade and dump this one. I should've just gotten a wooden footstool that cannot adjust, honestly.

Fabulous, perfect, and no assembly required! Should have bought this years ago

I like the fact that this foot rest has multiple positions to ensure that you get the leg rest the way you want it. It is a little lower than I expected, but it still does the job

I don't usually write reviews but I felt the need to leave one for this product to help shoppers make a decision. It's comfy and sturdy. Adjusting it can be a little tricky, but you will figure it out.

My only caution about this foot rest is to consider the width before purchasing. The seller is clear about the width, so I don't feel the need to reduce the product's rating because of this, but consider how you plan to use the footrest. I put below my desk when I work from home. It has been good for that. But when I'm sitting at my desk my feet naturally hang about 20 inches apart, and this foot rest is only 12 inches wide. As a result I have to angle my legs and feet so both are on the foot rest which isn't ergonomic, and that sort of defeats the purpose of having it in the first place. So again, not a "problem" with the product, just something I wasn't smart enough to consider when purchasing it.

Esperaba algo más grande, estable y cómodo. Es fácil de ajustar, pero no fue lo que esperaba al usarlo.

Bought it to use under my desk, very low and useless really. Not worth the price at all!!

Can move around where u need foot rest, very comfortable

I am loving this footstool and highly recommend it. It’s so easy to adjust and very comfortable. Service and delivery are great as well

The issue is that the hinges are holding a large portion of the force, but they are simply screwed into some empty plastic rectangle with no support. When a force is applied, the plastic bends at the right angle corner and the whole thing collapse with a large gap between the pannels, unlike when it is folded properly. That piece of plastic will probably break within the year. I might try to reinforce that tranded part by pouring some epoxy inside of the moulded plastic in order to stabilize the shape. Otherwise, I might just make another base, based on the dimentions and shape of this one, but out of plywood, because that will be a stable material. The adjustement hardware seems perfect, the hinges are strong enough to hold the weight, it's just the hollow plastic body that's too weak for the shearing forces.