EZ Connect Floats – Durable Floating Support for Pipes, Hoses & Cables
EZ Connect Floats are modular HDPE pipe-and-hose flotation systems engineered to support lines from 1 to 30 inches in diameter and larger. Each float set provides defined buoyancy ratings at 50 percent and 100 percent submersion, enabling precise flotation planning for dredging, slurry transport, and marine pumping applications. The split-body design enables rapid installation with stainless steel ratchet straps, while foam-free construction reduces weight and shipping volume. EZ Connect Floats are supplied in size-specific sets to match project load and submergence requirements.
Flotation System Advantages
- Defined buoyancy ratings at both 50 percent and 100 percent submergence allow accurate flotation planning based on pipe diameter, material weight, and operating conditions.
- Modular split float construction enables installation directly on existing pipelines without cutting, lifting, or disconnecting hose or pipe sections.
- Size-specific float sets are available for pipe and hose diameters ranging from 1 inch through 30 inches or larger, supporting small utility lines through large-scale dredging pipelines.
- Heavy-duty HDPE shells resist impact, abrasion, UV exposure, and prolonged exposure to water and slurry.
- Foam-free standard construction reduces overall float weight and simplifies transport, with optional foam filling available for increased buoyancy where required.
- Individual float units can be replaced in the field, reducing downtime and eliminating the need to remove the complete float assembly.
- Compact, stackable geometry lowers shipping volume and improves logistics efficiency for large projects.
Gallery
EZ Connect Floats in Action
Technical Specifications
Float Performance
- Pipe and Hose Diameter Range: 1 inch to 30 inches
- Float Units per Set: Up to 11 units, depending on diameter
- Buoyancy at 50 Percent Submergence: approximately 67 lbs to 690 lbs per set
- Buoyancy at 100 Percent Submergence: approximately 134 lbs to 1100 lbs per set
- Submergence Rating Basis: Static flotation at defined immersion levels
Float Construction
- Material: High-density polyethylene
- Design Type: Modular split float system
- Standard Configuration: Foam-free construction
- Optional Configuration: Foam-filled for increased buoyancy
- Environmental Resistance: UV, impact, abrasion, freshwater, and saltwater exposure
Installation and Configuration
- Installation Method: Clamp-on split design
- Fastening Hardware: Stainless steel ratchet straps
- Installation Requirement: No pipe or hose disconnection
- Field Serviceability: Individual float units are replaceable
Standard Supply
- Size-specific EZ Connect Float set per pipe diameter
- Stainless steel ratchet straps for installation
- Installation and handling guidance per float size
Technical Drawings & Resources
EZ Connect Floats Comparison Table
| Float Range | Pipe Diameter | Float Units | Submergence at 50% | Submergence at 100% |
|---|---|---|---|---|
| 1” | 1 in / 25.4 mm | 1 set | 67 lbs / 30.4 kg | 134 lbs / 60.8 kg |
| 2" to 3" | 2 in / 50.8 mm | 1 set | 67 lbs / 30.4 kg | 134 lbs / 60.8 kg |
| 4" | 4 in / 101.6 mm | 2 set | 125 lbs / 56.7 kg | 250 lbs / 113.4 kg |
| 6" | 6 in / 152.4 mm | 3 set | 188 lbs / 85.3 kg | 375 lbs / 170.1 kg |
| 8" | 8 in / 203.2 mm | 4 set | 250 lbs / 113.4 kg | 500 lbs / 226.8 kg |
| 10” | 10 in / 254 mm | 5 set | 313 lbs / 142 kg | 625 lbs / 283.5 kg |
| 12” | 12 in / 304.8 mm | 6 set | 375 lbs / 170.1 kg | 750 lbs / 340.2 kg |
| 14” | 14 in / 355.6 mm | 8 set | 436 lbs / 197.8 kg | 875 lbs / 396.9 kg |
| 18” to 20” | 18 in / 457.2 mm | 8 set | 500 lbs / 226.8 kg | 800 lbs / 362.9 kg |
| 22” to 24” | 22 in / 558.8 mm | 9 set | 630 lbs / 285.8 kg | 1000 lbs / 453.6 kg |
| 26” to 28” | 26 in / 660.4 mm | 10 set | 565 lbs / 256.3 kg | 900 lbs / 408.2 kg |
| 30” to 32” | 30 in / 762 mm | 11 set | 690 lbs / 313 kg | 1100 lbs / 499 kg |
Industries Served
Dredging and Marine Construction
EZ Connect Floats are widely used in dredging operations to support slurry pipelines, discharge hoses, and auxiliary lines. Defined buoyancy ratings help maintain consistent pipeline elevation, reduce joint stress, and improve overall dredge system stability in rivers, harbors, and nearshore environments.
Mining and Slurry Transport
In mining operations, EZ Connect Floats provide controlled flotation for slurry pipelines carrying abrasive materials across ponds, tailings areas, and process water zones. The modular design allows float spacing and buoyancy to be matched to changing slurry densities and pipeline configurations.
Oil and Gas
EZ Connect Floats support hoses and pipelines in offshore, nearshore, and inland oil and gas applications. The HDPE construction resists corrosion and environmental exposure while maintaining flotation for transfer lines, intake hoses, and temporary piping systems.
Wastewater and Industrial Effluent
Municipal and industrial wastewater facilities use EZ Connect Floats to support floating pipelines for effluent transfer, sludge handling, and temporary bypass systems. Defined buoyancy at controlled submergence levels helps ensure consistent flow alignment and safe operation.
Flood Control and Water Management
EZ Connect Floats are deployed in flood response and water management projects to support pump discharge lines, intake hoses, and temporary diversion pipelines. The clamp-on installation allows rapid deployment in emergency and short-term applications.
Ports and Harbors
Ports and harbor authorities use EZ Connect Floats to manage floating pipelines used for maintenance dredging, sediment removal, and environmental remediation. The modular system supports long pipeline runs while allowing easy reconfiguration as work zones shift.
Construction and Infrastructure Projects
Large scale construction projects rely on EZ Connect Floats to support dewatering lines, bypass piping, and temporary pumping systems. The reusable float sets reduce setup time and provide reliable flotation throughout changing site conditions.
Environmental Remediation
EZ Connect Floats are used in environmental cleanup projects to support pipelines involved in sediment removal, contaminated material transfer, and water treatment operations. The foam-free design aligns well with environmentally sensitive project requirements.
Emergency Flood Pumping and Temporary Pipeline Deployment
Case Study
The Problem
A flood response contractor was mobilized to protect critical infrastructure during a rapid rise in water levels. High-capacity pumps were deployed with long discharge hoses routed across flooded terrain and open water. The hoses required reliable flotation to prevent submergence, kinking, and excessive drag, while also allowing fast repositioning as pumping locations changed. Traditional fixed-flotation systems were too slow to install and difficult to adapt to dynamic conditions.
The Solution
EZ Connect Floats were selected to provide controlled flotation for the pump discharge lines. Size-specific float sets were installed directly onto the hoses using a split-clamp design and stainless steel ratchet straps, eliminating the need to disconnect or drain the lines. Published buoyancy ratings at defined submergence levels allowed the team to maintain consistent hose elevation while accounting for flow rate and hose weight.
The Result
The floating discharge system remained stable throughout continuous pumping operations, even as water levels and routing requirements changed. Installation time was significantly reduced, and field float spacing adjustments were made quickly. The reusable EZ Connect Float system enabled multiple redeployments during the response, improving operational efficiency and minimizing downtime during critical flood-mitigation activities.
Call for sales or support
Talk To About Any Question?
Frequently Asked Questions
What are EZ Connect Floats used for?
EZ Connect Floats provide controlled flotation for pipes, hoses, and cables in dredging, slurry transport, pumping, and marine applications. They help maintain proper line elevation, reduce joint stress, and prevent submergence during operation.
What pipe and hose sizes are supported?
EZ Connect Floats support pipe and hose diameters ranging from 1 inch up to 30 inches or larger. Each diameter range uses a size-specific float set designed to match buoyancy and load requirements.
How is buoyancy specified for EZ Connect Floats?
Buoyancy is published per size at both 50% and 100% submergence. These values are listed in pounds and kilograms, allowing accurate flotation planning based on pipe weight, contents, and operating conditions.
How many float units are included in a set?
The number of float units per set varies by pipe diameter, ranging from single-unit sets for smaller lines to multi-unit sets for larger pipelines. This ensures that buoyancy is evenly distributed along the pipe or hose.
Are EZ Connect Floats foam-filled?
EZ Connect Floats are foam-free as standard. This reduces weight, simplifies shipping, and improves environmental durability. Optional foam filling is available for applications requiring additional buoyancy.
How are the floats installed?
EZ Connect Floats use a split-body clamp design that installs directly onto existing pipes or hoses. Stainless steel ratchet straps secure the floats in place, eliminating the need to disconnect or cut the line during installation.
Can individual float units be replaced?
Yes. Individual float units can be removed and replaced without dismantling the entire float system. This allows fast field repairs and reduces downtime if a float is damaged.
Are EZ Connect Floats suitable for saltwater and slurry environments?
Yes. The high-density polyethylene construction resists corrosion, UV exposure, impact, and abrasion, making the floats suitable for freshwater, saltwater, and abrasive slurry environments.
How is float spacing determined along a pipeline?
Float spacing is determined by pipe diameter, pipe material, fluid density, flow conditions, and desired submergence level. The published buoyancy ratings provide the baseline data needed for proper spacing calculations.
Are EZ Connect Floats reusable across projects?
Yes. The modular design allows EZ Connect Floats to be removed, reconfigured, and reused on future projects. This makes them well-suited for temporary pipelines, emergency pumping, and projects with changing layouts.
HD (Heavy Duty) Slurry Pumps / Dredge Equipment
Related Products
For assistance Call 619-404-1916 and let us help match your project
with the right pump.